Ultimately, learning how to clean a bathtub and shower requires high levels of self-discipline and diligence. However, the job may seem to be hectic for many people, but it is good to develop the routine of washing and cleaning bathtubs and showers regularly.
For an effective and convenient cleaning process, it is good to have the necessary tools and techniques required. Therefore, this essay aims at discussing the main steps involved in the proper cleaning of your bathtub and shower to ensure a high standard of hygiene.
9 Simple Steps On How To Clean A Bathtub And Shower Efficiently
1. Remove All The Items From Their Typical Spot In The Bathroom
For the proper cleaning process, it is vital to remove all the products found in the shower and the bathtub. However, for enough space, you can remove unnecessary items that may increase the dirtiness in your shower bath. Notably, grab any available trash cans and towels outside the room.
2. Dust And Sweep
For proper and successful removal of the items from the bathtub and shower, it is very crucial to get rid of all dirt using a duster with a long handle in all corners of the bath, vents, and on the light fixtures. Besides, you can sweep the floor so that to remove any debris that may be present.
3. Pre-Treat The Tiles
Pre-treating the tiles simply is necessary by dipping the sponge into the product putting from top to bottom, and from the left-hand side to the right-hand side on the spray in case you are making the use of it. When done, ensure you get the stable chrome.
How To Clean A Bathtub And Shower: Step 4-6
4. Apply Cleaner To Shower And Bathtub
In case you have been cleaning your shower regularly, you can apply an all-purpose cleaner, or similarly, you can use an acid-based filter where there is a severe shower build-up. Additionally, you can make a paste and apply it to the grout lines using a toothbrush.
Equally, ensure that you brush thorough the shower track and also within the shower door. Allow it to soak thoroughly if necessary while pre-treating everything.
5. Scrub The Tiles
Scrubbing of the tiles is necessary using the coarser side on the sponge. Usually, the technique here simply involves applying pressure from the top to the bottom and sideways, respectively, using a wet sponge.
This facilitates easy removal of the stains that stick to the walls of the shower and tub. Besides, you can add more baking soda to the wet sponge if you require extra abrasion that enables you to remove any stubborn soap from the walls.
6. Pre-Treat The Tub
Pre-treating the tub is crucial using the soft part of the sponge on the product again. Give it an allowance of about five minutes gap in between the scrubbing off and applying the product using something abrasive. Further, you can pro the tip and roll up the mat bath when scrubbing the bathtub.
How To Clean A Bathtub And Shower: Step 7-9
7. Scrubbing The Tub
After five minutes, wash the tub slowly and gently using an abrasive part of the wet sponge. Scrub more and more to remove all the available soap scum while throwing on extra baking soda when you require further abrasion. Also, ensure to scrub chrome.
When rinsing, it is good to use detachable showerheads. However, in the absence of detachable showers, it is advisable to fill a considerable container and pour water to the tiles starting from the top to the bottom. Ensure to remain with a smooth, clean finish by getting off the products.
9. Squeegee And Shine
Lastly, it is possible to remove the residual water from the walls using the squeegee. Therefore, it is essential to remove all from within the tub so that to prevent water from hanging around, making it appear shiny. You can use a microfiber sheet when cleaning the pieces of chrome.
Generally, the above steps will enable you to clean your bathtub and shower fast and more efficiently. Therefore, ensure to follow the steps one after the other and after that, stock your bathroom with clean towels and fresh bathmat as you sit back and take your shower comfortably in your clean bathtub.