NestAssociate is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

How To Remove Moen 1225 Cartridge

If you have a Moen 1225 cartridge that needs to be removed, there are a few steps you need to take. First, you will need to turn off the water to the faucet. Next, you need to remove the handle.

There is a small set screw that needs to be removed in order to do this. Once the handle is off, you will be able to see the cartridge. There is a retaining clip that needs to be removed in order to take the cartridge out.

Once the cartridge is out, you can put in a new one.

  • Start by shutting off the water to your sink
  • This is done by turning the knob to the right until it stops
  • Place a towel over the faucet to protect it and use a wrench to remove the retaining nut that holds the cartridge in place
  • Pull out the old cartridge and inspect it for any damage or debris
  • Insert the new cartridge, making sure that it is properly seated
  • Replace the retaining nut and turn on the water

Moen 1225 cartridge removal tool

If your Moen faucet is leaking, it may be because the cartridge needs to be replaced. The Moen 1225 cartridge removal tool is a simple and easy way to do this. First, shut off the water supply to your Moen faucet.

Next, use the Moen 1225 cartridge removal tool to remove the old cartridge. Be sure to note the orientation of the old cartridge so you can install the new one in the same way. Once the old cartridge is removed, install the new one and turn on the water supply.

Test the faucet to make sure it is no longer leaking. If it is, then you may need to adjust the retaining nut under the sink. The Moen 1225 cartridge removal tool is a simple and easy way to replace a Moen faucet cartridge.

With just a few minutes and a few tools, you can fix a leaking faucet and have it working like new again.

how to remove moen 1225 cartridge

Credit: terrylove.com

How do you remove a Moen 1225 cartridge?

Moen is a leading manufacturer of kitchen and bathroom faucets. The Moen 1225 cartridge is a replacement part for Moen faucets. It is a plastic cartridge that fits into the faucet handle.

The Moen 1225 cartridge is easy to install and remove. To remove the Moen 1225 cartridge, first turn off the water supply to the faucet. Next, remove the handle by unscrewing the set screw with a hex wrench.

With the handle removed, you will be able to see the cartridge. Use a cartridge puller tool to remove the cartridge. If you don’t have a cartridge puller tool, you can use a pair of pliers.

Once the cartridge is removed, you can install the new one by following the same steps in reverse.

How do you remove a Moen cartridge without the tool?

If you need to remove a Moen cartridge without the tool, you can use a pair of pliers. First, turn off the water to the faucet. Next, open the faucet to release any remaining water pressure.

Use the pliers to remove the retaining clip that holds the cartridge in place. Finally, pull the cartridge out of the faucet.

How do you remove a Moen cartridge?

If you need to remove a Moen cartridge, the first thing you need to do is turn off the water supply to the faucet. Next, use a pair of pliers to remove the retaining nut that holds the cartridge in place. Once the retaining nut is removed, you should be able to pull the cartridge out of the faucet.

If the cartridge is stuck, you may need to use a small screwdriver to pry it loose. Once the cartridge is out, you can inspect it for damage and replace it if necessary.

How do you remove a Moen single handle cartridge?

It’s easy to remove a Moen single handle cartridge. Just follow these simple steps: 1. Shut off the water supply to the faucet.

2. Remove the handle. 3. Use a wrench to remove the retaining nut. 4. Pull out the old cartridge.

5. Insert the new cartridge. 6. Re-attach the retaining nut and handle. 7. Turn on the water supply.

That’s all there is to it! You should now have a brand new Moen single handle cartridge in place.

1225 Cartridge Replacement Moen Tub and Shower

Conclusion

If you have a Moen 1225 cartridge that needs to be removed, you can follow these simple steps. First, turn off the water supply to your Moen faucet. Next, use a handle puller to remove the handle.

Once the handle is removed, you will be able to see the cartridge. Use a cartridge puller to remove the cartridge. Finally, use a towel to clean up any water that may have leaked out.

You can easily find the best products according to consumer reviews and ratings. Our AI technology finds the best product and describes it according to customer reviews. Not all information on this blog is 100 percent accurate.