Many times for various reasons, your shower handle may need to be replaced or removed. Different shower handles have different designs, due to which their installation and removal process is a bit different. In most cases, while you try to remove it, you can see the screw attached to the shower handle. If you can’t find a screw with the shower handle in the usual way, it means the screw is hidden somewhere.
If you still don’t get it, then there is no reason to worry, our how to remove shower handle without screw guide is for you. In this guide, we have shared two simple methods, where we have discussed step by step how to remove stuck shower handle easily, as well as we have answered some of the most essential frequent questions. So let’s get started.
Method 1: How to Remove Shower Handle without Screw
There are many reasons why the modern shower system’s handle screws are hidden; you will find many shower handle screws under the additional cap. In many cases, you may have to twist and remove the handle. However, no matter which way the screw is, we will show a few ways in this section. You can easily remove the stuck shower handle to apply them.
Step 1: When you do not find any screw in the shower handle after a lot of searching, if you have the user manual of the shower handle, check the details in it; find here about the twisting handle part. If you do not have user manuals, you can go to the official site of the brand of your shower handle, and there will be everything given about in the installation guide.
If you are sure that the twisting handle part is there. Then you will need two common tools to remove your shower handle.
You Will Need:
- Allen Wrench
Step 2: Then place the washcloth on the handle, then hardly twist it with both hands. You will notice that it has been removed from the shower, and this removed part is basically called a shower cap.
Step 3: Then, take a Hex or Allen Key of the right size, which will suitably match with the shower handle. Then rotate in the anticlockwise direction with the help of the wrench. You can see that it has started to move slowly. Then carefully remove the shower handle.
Method 2: How to Remove A Shower Handle with No Visible Screws
If you do not open the cap after trying so much time, it means there is a hidden screw on either side. Follow this method to remove the shower handle.
You Will Need:
- A screwdriver
- An Allen Wrench
- WD-40 Penetrating Oil
Step 1: According to the suggestions of professionals, first, before doing any plumbing-related work, must be turned off the main valve of primary house water sources. Then open the water faucets to drain all the water caught in the pipe.
Step 2: Then, find out the brand name and model number of your shower handle because it will help you to find the exact type of screws and other things easily.
Step 3: Then, you have to determine if there is any screw like the previous method. Most of the time, the screw is covered by the handle. Though you can see different types of shower handles with varying processes of installation. However, if you remove the cover of the handle, then most likely, you will find the screw in the middle.
Step 4: Then, separate the screw from the handle. And keep rotating the handle gradually. After some time, the shower handle will be removed.
If you want to understand this process more easily. You can also watch the video below.
FAQ: Frequently Asked Questions
How do you remove a handle without screws?
If you remove the backplate of the shower, you can see the screws in one of the parts. In most cases, you have the chance to see the screws in the middle. If you can’t see any screws even after noticing well, it means that there are no screws in it.
You try to turn the handle with the help of a hand. After a while, you will see that it has become very loose and will come right off.
How do you remove a Moen shower handle without screws?
Moin shower handle screws are usually under the plate. If you don’t find the screw, then look carefully under the handle of the fountain; there are chances to stay there. If so, then use an Allen wrench to remove the screw properly. If you want to use alternative ways, you can use a drill.
Can you replace the shower handle without replacing the valve?
The short answer is “Yes.” It is possible to replace the shower handle without replacing a valve. In this case, you have to buy the same model shower handle of the same existing brand. In this way, you can easily install it again without replacing the valve.
How do you remove an old shower faucet?
Take a Phillips screwdriver first. Then insert it inside the faucet handle. Then hold the handle tightly with one hand, connect the screwdriver into the screw with the help of the other hand, and keep rotating it clockwise. You will then notice that the screw is slowly loosening, and the handle is freed. In this process, you can remove the old shower handles.
Can I remove a shower faucet without turning off the water?
“Yes.” You can remove the shower faucet without turning off the water. But we will recommend you do not try this. However, following this process will waste a lot of water. In this case, for installation, first, you have to open the other facets of your house; it will reduce the water pressure a lot. And you can quickly install the new faucet.
Hopefully, our guide has helped you understand how to remove shower handle without screw easily. If you still notice that the handle is becoming difficult for you to remove, as well as it being stuck so badly, then it would be better not to try it yourself because it will damage the shower system badly. In this case, you must take the help of a professional plumber.