NestAssociate is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

How To Replace A Moen 1225 Cartridge

Moen is one of the leading manufacturers of kitchen and bathroom fixtures. The Moen 1225 cartridge is a replacement part for Moen faucets. It is a relatively easy process to replace a Moen 1225 cartridge.

The first step is to turn off the water supply to the faucet. Next, use a wrench to remove the handle. Be careful not to damage the finish on the handle.

Once the handle is removed, you will be able to see the cartridge. Use a cartridge puller to remove the old cartridge. If you do not have a cartridge puller, you can use a pair of pliers.

Once the old cartridge is removed, you can install the new cartridge. Make sure that the new cartridge is properly seated and then reattach the handle. Once the handle is in place, you can turn on the water supply and test the faucet.

  • Unscrew the retaining nut from underneath the sink using a wrench
  • Pull out the old cartridge and discard it
  • Insert the new cartridge into the faucet body and hand-tighten the retaining nut
  • Turn on the water supply and check for leaks

How to replace moen single handle kitchen faucet cartridge

If your Moen single handle kitchen faucet is leaking or not performing as it should, it may be time to replace the cartridge. This is a relatively easy repair that anyone can do, as long as you have the right tools and replacement cartridge. Here’s a step-by-step guide on how to replace a Moen single handle kitchen faucet cartridge.

What You’ll Need: -Adjustable wrench -Pliers

-Moen replacement cartridge (#1255 or #2259) 1. Start by turning off the water supply to your Moen faucet. There should be a shut-off valve under your sink.

2. Use an adjustable wrench to remove the handle of your faucet. There is usually a small set screw that needs to be removed first. 3. With the handle removed, you should now be able to see the cartridge.

Use pliers to remove the retaining clip that holds the cartridge in place. 4. Pull the old cartridge out and inspect it. If it’s damaged, you may be able to find the cause of your faucet’s problem.

5. Take your new cartridge and lubricate the O-rings with a little bit of plumber’s grease. 6. Insert the new cartridge into the faucet body and make sure it’s seated properly.

how to replace a moen 1225 cartridge

Credit: www.amazon.com

How do you change a Moen shower cartridge 1225?

If your Moen shower is leaking or the handle feels loose, you may need to replace the shower cartridge. The Moen 1225 shower cartridge is a common replacement cartridge. Here’s how to replace it:

1. Turn off the water to the shower. 2. Remove the handle. There is usually a set screw that holds the handle on.

Use a Allen wrench or a Phillips head screwdriver to remove the set screw. 3. Pull the handle off. 4. Use a pair of pliers to remove the old cartridge.

5. Insert the new cartridge into the shower valve. Make sure it is seated correctly. 6. Put the handle back on and tighten the set screw.

7. Turn the water back on and test the shower.

How do you replace a Moen single handle cartridge?

If your Moen faucet is leaking or you’re otherwise having issues with the flow of water, it may be time to replace the cartridge. This is a relatively easy process that you can do yourself, and it should only take about an hour. Here’s a step-by-step guide to replacing a Moen single handle cartridge:

1. Start by shutting off the water supply to your Moen faucet. This is usually done by turning a knob or lever under the sink. 2. Place a towel or bucket under the faucet to catch any water that may drip out when you remove the old cartridge.

3. Use a Moen cartridge removal tool, or a small flathead screwdriver, to remove the retaining clip that holds the cartridge in place. 4. Pull out the old cartridge and discard it. 5. Insert the new cartridge into the faucet body, making sure that it’s properly seated.

6. Reattach the retaining clip, and then turn on the water supply. 7. Test the faucet to make sure that the water is flowing properly. If not, repeat the above steps.

Can you replace a Moen 1225 cartridge with a 1222 cartridge?

It is possible to replace a Moen 1225 cartridge with a 1222 cartridge with a few caveats. The 1222 cartridge is the updated version of the 1225 cartridge and is compatible with most Moen faucets. The 1222 cartridge has a slightly different shape than the 1225, so it may not fit perfectly into the faucet housing.

In addition, the 1222 cartridge has a smaller diameter than the 1225, so it may not seal properly. If you decide to replace your 1225 cartridge with a 1222 cartridge, be sure to use plumber’s putty or silicone caulk to create a watertight seal.

What is the difference between Moen 1225 and 1225b cartridge?

When it comes to Moen 1225 and 1225b cartridges, there are a few key differences to take note of. For starters, the 1225b cartridge is designed for use with 1-handle kitchen and bathroom faucets, while the 1225 cartridge is designed for use with 2-handle faucets. Additionally, the 1225b cartridge features a built-in check valve that helps to prevent backflow, while the 1225 cartridge does not.

Finally, the 1225b cartridge is also a bit longer than the 1225 cartridge, which helps to provide a better seal.

How to install Moen 1225 & 1225b Shower Cartridge. Similar to 1222

Conclusion

If your Moen faucet is leaking or has poor water pressure, you may need to replace the cartridge. The Moen 1225 cartridge is a common replacement cartridge. This article will show you how to replace a Moen 1225 cartridge.

First, turn off the water to your faucet. You will need to remove the handle to access the cartridge. Use a hex wrench to remove the set screw that holds the handle in place.

Once the set screw is removed, you can pull the handle off. Next, use a wrench to remove the retaining nut that holds the cartridge in place. Be careful not to damage the finish on your faucet as you remove the retaining nut.

With the retaining nut removed, you can pull the old cartridge out and replace it with a new one. Reattach the retaining nut and tighten it with a wrench. Make sure the nut is tight so that the cartridge will not come out.

Finally, reattach the handle and turn the water back on. Test your faucet to make sure it is working properly.

You can easily find the best products according to consumer reviews and ratings. Our AI technology finds the best product and describes it according to customer reviews. Not all information on this blog is 100 percent accurate.