NestAssociate is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

how to unclog a toilet with a plunger fast

How to Unclog a Toilet with a Plunger: 6 Full Proof Steps

Do you have knowledge and skills on how to unclog a toilet with a plunger? If you don’t! No worry. This is the common and often problem that most people experience which requires urgent attention regularly. The use of a plunger will help to get your toilet back to normal before the situation worsens in your bathroom.

Therefore, this article aims at discussing steps followed in ensuring that your morning household disaster is well deterred by clearing clogged toilets quickly. However, some people think that it is a hectic process. So, let’s take a glance at the following steps that will help to unclog your toilet more efficiently.

Read Also:

How to unclog a toilet with a plunger:

how to unclog a toilet with a plunger

1. Close the flapper of the toilet

When water overflows out of your toilet, it is good to take the lid of the tank and close the flapper of the toilet quickly. Usually, a flapper is a small part which ensures that water flows from the tank into the bowl. It is crucial to prevent water completely from overflowing in your toilet.

However, the flush may burst quickly, but it is reasonable; therefore, to get rid of its top before pulling the trigger. But how? It is simple, let one of your hand push the flusher as the other one tries to close the flapper until water starts rising to stop the flood.

2. Get the right plunger

Different plumbing fixtures requires various types of the plunger. Mostly, sink plunger or cup plunger commonly used in fixing clogs in the toilets. Besides, flat bottomed plunger consists of a dome shape with a rubber cap on its top meant for sinks and tubs.

However, for effective use of a plunger, flange plungers with a funnel cup the most suitable and best to use. This flange comes with an added piece which extends up to the bottom of the cup containing rubber. The flanges are essential since they provide a seal and fits perfectly in the bowl.

3. Warm-up your plunger using hot water

After proper identification of the plunger, the next step requires removal of the hardness and stiffness of the plunger. For convenient usage of the plunger, it is crucial to soften it. But how is it possible to soften the plunger? Very simple by the use of hot water.

First, before using the plunger, let it dip into hot water to make the rubber soft and pliant quickly. Usually, pliant rubbers provide an excellent seal on the bowl of the toilet.

4. Plunge correctly

Here, it involves holding the plunger in the bowl of the toilet for accurate sealing of the exit hole. While proceeding, do not concentrate only on downward pushing but also a pullback is essential. Give your toilet some right down and upstrokes using the plunger before flushing it.

The water on the bowl should be apparent upon successful flushing. Sometimes flushing once may not work well. Therefore it is good to repeat the whole plunge while flushing repeatedly. However, you should ensure that the flapper is correctly closed.

5. Add more hot water and dishwasher detergent

Before plumbing, add the mixture of dishwasher detergent and few cups of hot water to the bowl of the toilet. Allow the water to settle for some few minutes as the mild heat produced by hot water breaks the stuff quickly making plunging much simple and easy.

Similarly, another trick is by the use of baking soda and vinegar. The two mixture reacts, producing a chemical that helps the breaking down of the clog. How? Right, pour some baking soda into the toilet’s bowl and add vinegar on the top of it. The clogs disappear entirely.

Related content:

6. When plunging fails

Sometimes, when plunging fails, never lose hope instead try to get a closet auger or toilet auger which are essential alternative tools for unclogging toilets. The device consists of a crank handle and metal tube with a cable that runs through it. The cable comes down the bowl first while flushing to clear clogs quickly.

However, the corkscrew tip on the cable of the auger becomes hectic in trapping as you fix the clogs. Therefore to avoid such situation, you should pull them out completely.

Frequently Asked Questions (FAQs?)

How do you fix a badly clogged toilet?

It is very simple. Add only one cup of baking soda into the clogged toilet and give it a few minutes to settle. On top of baking soda, add two cups of vinegar. The mixture reacts causing bubbles which get rid of the clogs from the bowl.

What do plumbers use to unclog drains?

Plumbers usually use a plumbing snake also called auger to clear blockages in drain lines. Drain chemical cleaners consist of a high concentration of sulphuric acid that breaks and soften up clogs from the bowl of the toilet.

Can coke clear a clogged toilet?

Partially yes. Pour hot and not boiling water one metre away from the bowl of the toilet. The energy of the pour itself is enough to remove the blockage from the bowl without any damages.


In general, unclogging a toilet is not hectic as most people think. Therefore, having gone through the six steps on how to unclog your toilet, I hope you have gotten enough skills that will enable you to carry out regular clean-up to prevent your toilet from clogging.

You can easily find the best products according to consumer reviews and ratings. Our AI technology finds the best product and describes it according to customer reviews and ratings. Not all information on this blog is 100 percent accurate.