NestAssociate is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

Toilet Anchor Bolts Spinning

Toilet Anchor Bolts Spinning: Reasons & Solutions

Toilet anchor bolts spinning is a common issue in old toilets, also many times, if bolts fail to be firmly attached, in case this kind of common issues have occurred. Though many homeowners do not take this issue seriously, but it can be a major problem in the future, so whenever the toilet anchor bolts start spinning, it is necessary to take steps to fix them.

As we have said before, these issues can be seen in old toilets in most of the fields, also for various reasons. We have arranged today’s complete guide, where we have shared everything step by step; you can easily understand everything, the reason for spinning toilet anchor bolts, and how to fix toilet anchor bolts spinning issues.

What Is The Main Reason for Toilet Anchor Spinning

Though there are many causes, but we have tried to highlight a few main reasons in this part. If you can find out the issues after checking them, try to solve it as soon as possible. Otherwise, the toilet bowl with bolts may be completely damaged.

  • One of the reasons why toilet anchor bolts spin is because of the rust on the toilet bolts, which causes the seat to move out of place whenever the weight is placed on the toilet.
  • Many times, it is seen during toilet installing, due to the inconsistency of the required hole of the toilet anchor bolts, the bolts do not fit perfectly with the holes; as a result, after a while, the toilet starts spinning.
  • Many toilet anchor bolts are always moist; there is moisture around the bolts for a long time, resulting in which moisture starting to be released from the bolts. The last time bolts started slipping, at one point, the toilet also started spinning.

How to Fix Toilet Anchor Bolts Spinning Issues

Why Toilet Anchor Bolts Spinning

Anyway, if any of the above reasons match the causes of your toilet bolt spinning, follow this section’s steps to solve it.

Before Starting, You’ll Need:

  • Philips Screwdriver
  • Rubber Gloves
  • Toilet Bolts, Nuts
  • Plastic Cap Holder
  • Pliers and Spray Lubricant

After collecting the equipment, follow the steps below, step by step.

Step 1: Wear Protective Clothes

To deal with unpleasant situations, be sure to prioritize your safety in any repairing or replacing work. In the case of fixing toilet anchor bolts issues, be sure to wear your rubber gloves and other protective equipment.

Step 2: Remove the Spinning

Method 1: Remove the Spinning Bolt with Screwdriver

Follow this method if the spinning bolt has no rust and is clean. First, attach the screwdriver tightly with the bolt position to remove the spinning bolts safely. If possible, secure the bolt using a wrench. Then keep rotating the spinning bolt in an anti-clockwise direction till it comes out.

Method 2: Cut the Spinning Bolt with Mini Hacksaw

It is often seen that the condition of the spinning bolts is very bad, which are not in a position to fasten with the help of any tools. Also, if you fail to remove the spinning bolt with the help of a screwdriver, then take the help of a mini hacksaw as the last step, and use it to cut the bolt.

When cutting the bolt with the help of a mini hacksaw, be as careful as possible not to damage any parts.

Step 3: Inspect the Bolt Hole

After removing the toilet anchor bolts, then clean the hole sufficiently; you will usually see lubricant or other dirt there; in this case, to better understand the issue of the hole, clean the place well and wipe around with the help of a soft cloth. Then take a fair look at the hole of the anchor bolts and see any kind of damage here or not.

Then choose a proper size spinning bolt; once again, you must choose the exact size because the lack of proper size bolts is the most common issue of toilet spinning.

Step 4: Drill the Toilet Anchor Bolt Hole

Then take a drill machine, help it to create a new hole for the anchor bolt well. Be careful when creating the hole so that it does not become too big or small. Make sure the hole is the proper size of the bolt, and there will be no spinning.

Step 5: Test The Toilet Anchor Bolt

After successfully creating the desired hole, insert the bolt into the hole with the help of a screwdriver. And make sure that the bolt is not spinning in any way. Also, check whether the bolts you want to install are in acceptable condition. If they are not in good condition, then buy new spinning bolts to replace them. And safely install with the help of a screwdriver.

Related Article:

What Causes Yellow Water In Toilet?
Why Does My Bathroom Smells Like Poop?

Final Verdict

Even if you are a beginner, you can easily fix the toilet anchor bolts spinning issues by following our methods above. However, when replacing the toilet anchor bolts, you must be careful about the actual size and holes and try to follow our guide with the manufacturer’s instructions book. If you have no idea about these things, then we will have recommendations for you to take the help of a professional plumber.

You can easily find the best products according to consumer reviews and ratings. Our AI technology finds the best product and describes it according to customer reviews and ratings. Not all information on this blog is 100 percent accurate.